CleanScrape Belt Cleaners the new design in cleaning

October 19, 2015

The Act GroupBelt Cleaners

 

Installed at an angle across the discharge pulley, the CleanScrape Cleaner requires very little space for installation. Mounted in the primary position, the cleaner is equipped with tungsten carbide tips that can be used on mechanical splices, making the CleanScrape Cleaner one of the most versatile belt cleaners on the market.
• Lasts longer than any other cleaner
• Few blade changes needed
• Minimal maintenance required
• Tungsten carbide tips safe for spliced belts
If the product being moved by your conveyors has a significant build-up of dust, dirt and clay around the conveyor head drums and along return rollers then you are going to have to provide constant attention and cleaning, this build up can quickly result in premature belt failure and equipment breakdowns.
The CleanScrape cleaner features optimum cleaning results, simple installation, removed material returns to the main flow and provides low wear to the belt, cleaners and reduces maintenance costs.
Using the CleanScrape cleaner can reduce the time your employees spend cleaning material buildups on your existing cleaners.
Suitable for belt speeds up to 1500 fpm (8 m/s) if vulcanized and 800 fpm (4 m/s) if mechanically spliced, for use with all types of mechanical joints, and on reversing belts and in explosive atmospheres.
Available with stainless steel installation kits and in 3 different size pulley diameters.
Conveyor Belt Width up to 96 inches and speed of 1500 fpm.

Customer’s satisfaction comments:
“The cleaners were are so effective, we anticipate we will have them installed on each transfer point by 25 December 2015.”

“Maintenance is almost unnecessary. The volume of cleaning activities at the belt systems has been significantly reduced owing to the use of IBS cleaners. We highly recommend the use of this system.”

Join the new age in belt cleaner. Try out the CleansScrape cleaner today!